日本SMC單作用型隔膜泵，PB1011A-01-BN

電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
公司網站：www.zgxbershoushebei.com.cn

隔膜泵／單作用型   PB 
 系列/CAD 動作方式 輸出流量 (L/min) 接液部材質
PB1000 PB1011  內置電磁閥型 0.008～2 聚丙烯
PB1013  氣控型 0.008～0.5
 
Required specification example: Find the pilot air pressure and pilot air consumption
for a discharge rate of 600 ml/min and a discharge pressure of 0.15 MPa.
<The transferred fluid is clean water (viscosity 1 mPa·s, specific gravity
1.0) solenoid valve cycle 5 Hz>
∗ If the total lifting height is required instead of the discharge pressure,
a discharge pressure of 0.1 MPa corresponds to a total lift of 10 m.
Selection procedure:
1. First mark the intersection point for a discharge rate of 600 ml/min and a
discharge pressure of 0.15 MPa.
2. Find the pilot air pressure for the marked point. In this case, the point is
between the discharge curves for 0.35 MPa and 0.5 MPa, and based on
the proportional relationship to these lines, the pilot air pressure for this
point is approximately 0.4 MPa.

Find the air consumption for operation with a 5 Hz switching cycle
and pilot air pressure of 0.35 MPa from the air consumption graph.
Selection procedure
1. Look up from the 5 Hz switching cycle to find the intersection with
SUP = 0.35 MPa.
2. From the point just found, draw a line to the Y-axis to find the air consumption.
The result is approximately 9 l/min (ANR).
1. These flow characteristics are for fresh water (viscosity 1 mPa·s,
specific gravity 1.0).
2. The discharge rate differs greatly depending on properties (viscosity,
specific gravity) of the fluid being transferred and operating conditions
(density, lifting range, transfer distance), etc.
Required specification example:
Find the pilot air pressure and pilot air consumption for a discharge rate
of 270 ml /min, and a viscosity of 15 mPa·s..
Selection procedure:
1. First find the ratio of the discharge rate for fresh water when viscosity
is 15 mPa·s from the graph to the left. It is determined to be 45%.
2. Next, the viscosity of 15 mPa·s and the discharge rate of 270 l/min in
the required specification example are converted to the discharge
rate for fresh water. Since 45% of the fresh water discharge rate is
equivalent to 270 ml /min in the required specifications, 270 ml /min ÷
0.45 = approximately 600 ml/min, indicating that a discharge rate of
600 ml/min is required for fresh water.
3. Finally, find the pilot air pressure and pilot air consumption based on
viewing of the flow characteristics.
Viscosity: Transfer is possible up to about 100 mPa·s.
Dynamic viscosity ν = Viscosity μ/Density ρ.

日本SMC單作用型隔膜泵，PB1011A-01-BN

 隔膜泵／雙作用型   PA/PAP/PAX 
 系列/CAD 動作方式 輸出流量 (L/min) 接液部材質
PA3000 PA3□□0  自動運轉型 1～20 ADC12
(鋁)
SCS14
(不銹鋼)
PA3□13  氣控型 0.1～12
PA5000 PA5□□0  自動運轉型 5～45
PA5□13  氣控型 1～24
PAP3000 PAP3310  自動運轉型 1～13 New PFA
(氟素樹脂)
PAP3313  氣控型 0.1～9
PAX1000 PAX1□12  內置振動減衰器
自動運轉型 0.5～10 ADC12
(鋁)
SCS14
(不銹鋼)
 

隔膜泵／單作用型   PB 
 系列/CAD 動作方式 輸出流量 (L/min) 接液部材質
PB1000 PB1011  內置電磁閥型 0.008～2 聚丙烯
PB1013  氣控型 0.008～0.5
 

非金屬泵／雙作用型   PAF 
 系列/CAD 動作方式 輸出流量 (L/min) 接液部材質
PAF3000 PAF3410  自動運轉型 1～20 New PFA
(氟素樹脂)
PAF3413  氣控型 1～15
PAF5000 PAF5410  自動運轉型 5～45
PAF5413  氣控型 5～38

日本SMC單作用型隔膜泵，PB1011A-01-BN

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!